PublishedTribology Letters · 73(4), 114 · 2025

MoS₂ lubricant performance across temperatures

The review assembled temperature-dependent friction, wear, and wear-life results for MoS₂ coatings. In inert gas or vacuum, performance consistently deteriorated below 220 K and changed relatively little between 220 and 540 K.

Tutorial Journal article Free full text

The problem

Space mechanisms encounter temperatures beyond the range covered by any single lubricant study. Different coatings and test conditions make individual measurements difficult to compare.

What I did

The review compiled published friction, wear, and wear-life data into a plot matrix. The authors compared reported trends, proposed mechanisms, and gaps across studies.

220 KLow-temperature friction transition

Data from five studies showed a transition toward higher friction around this temperature, indicating poorer sliding performance in the colder regime.

220 to 540 KModerate-temperature range in inert gas or vacuum

The review found a relatively small temperature effect on lubricant performance in this range, unlike the consistent deterioration below it.

What we found

  1. In inert gas or vacuum, lubricant performance consistently deteriorated below 220 K and showed relatively little temperature dependence between 220 and 540 K.
  2. Friction data from five studies showed a transition toward higher friction around 220 K.
  3. In air above 270 K, studies reported non-monotonic and sometimes opposing trends, associated with competing water desorption and oxidation.
  4. The review identified gaps in temperature-dependent transfer-film characterization and simulations of doped coatings.

Figures

Six-panel matrix of friction, wear rate, and wear life plotted against temperature in two environments.
The plot matrix. Friction coefficient, specific wear rate, and wear life vs temperature, compiled from 21 references and split into vacuum/inert gas and air.
Comparison plots showing temperature-dependent friction and wear life.
Below room temperature. In vacuum or inert gas, reported friction rises and wear life falls as coatings get colder, with the transition near 220 K.

Why it matters

The review helps spacecraft engineers identify test conditions and evidence gaps when selecting dry-film lubricants.

Recreate it yourself. Turn digitized friction, wear-rate and wear-life data into the review’s metric × environment plot matrix. Open the tutorial →


Next case study · Why classical models get ion adsorption on gold wrong → · Back to MoS₂ lubricants for space research