Abrar Faiyad

PhD candidate, Mechanical Engineering, UC Merced · Merced, California, USA

Summary

Trains models of atomic interactions on quantum calculations and tests where they work in molecular dynamics simulations of molten salts, lubricants, and electrode interfaces.

Education

University of California, MercedJan 2023 – present
Ph.D., Mechanical Engineering · GPA 3.93 / 4.00. Advisor: Prof. Ashlie Martini.
University of California, MercedMay 2026
M.S., Mechanical Engineering · GPA 3.93 / 4.00.
Bangladesh University of Engineering and Technology (BUET)Feb 2017 – May 2022
B.Sc., Mechanical Engineering · First-author PCCP paper as an undergraduate.

Research experience

Guest Facility User · Argonne National Laboratory · Center for Nanoscale MaterialsFall 2026 – present
  • Train and fine-tune MACE, MACE-RSGA, and eSEN models for platinum–water interfaces.
  • Compare reaction barriers and solvent structure against DFT and ab initio MD.
  • Use active learning to add the atomic environments the models are missing.
Research Aide Technical – PhD · Argonne National Laboratory · Computational Science DivisionMar 2026 – Aug 2026
  • Fine-tuned universal MACE potentials for molten LiCl–FeCl₂ with multi-head replay and LoRA. This removed an unphysical Fe–Fe clustering artifact inherited from solid-state training data.
  • Validated liquid structure against high-energy X-ray diffraction (mean R-factor 0.034) across composition and temperature.
  • Automated DFT frame generation for labeled training data across molten-salt compositions on ALCF systems.
  • Built an uncertainty-biased active-learning loop: bias forces push MD toward uncertain configurations, which are DFT-labeled and added to training.
  • Computed excess thermodynamic properties and the LiCl–KCl phase diagram with Kirkwood–Buff theory on ML-driven MD.
  • Trained and benchmarked MACE foundation models on the Open Catalyst 2025 (OC25) dataset at Aurora scale. Built agentic workflows that set up data generation and fine-tuning from plain-language instructions.
Visiting Scholar · NASA Jet Propulsion LaboratoryMar 2025
  • Ran tribometry of MoS₂ dry-film coatings across temperatures.
  • Fed the observations into the low-temperature wear simulations.
Graduate Student Researcher · Martini Research Group · University of California, MercedJan 2023 – present
  • Fine-tuned a MACE model for MoS₂–N₂ with LoRA and automated DFT data. Validation energy RMSE fell from 76.0 to 9.2 meV/atom.
  • Benchmarked Meta’s universal UMA potential against DFT for 25 MoS₂ dopants and published the workflow as open source (JCTC 2026).
  • Trained DeepMD potentials for ions at solid–liquid electrochemical interfaces.
  • Co-originated, and helped benchmark the ML potential for, a study of ion adsorption on gold (JCP 2026).
  • Ran fracture, water-adsorption, and sliding simulations that explain cold-temperature failure of MoS₂ lubricants (Friction 2025).
Research Assistant · Motalab Lab · BUETJun 2022 – Dec 2022
  • Related cooling rate and microstructure to void nucleation and cyclic response.
  • Mentored undergraduates in simulation and analysis. The work led to peer-reviewed papers on solder, CdTe nanowires, and printed Inconel.

Publications

  1. A. Faiyad, A. Martini. Machine Learning Interatomic Potentials Enable Molecular Dynamics Simulations of Doped MoS₂. Journal of Chemical Theory and Computation 22(5), 2574–2585 (2026). doi:10.1021/acs.jctc.5c02004
  2. F. Roncoroni, A. Faiyad, Y. Li, T. Ye, A. Martini, D. Prendergast. Deriving Effective Electrode–Ion Interactions from Free-Energy Profiles at Electrochemical Interfaces. The Journal of Chemical Physics 164(8), 084702 (2026). doi:10.1063/5.0321463
  3. A. Faiyad, F. H. Bhuiyan, A. Vellore, D. A. Johnson, A. Kennett, A. Martini. Mechanisms of MoS₂ Dry Film Lubricant Behavior at Low Temperatures. Friction 13(4), 9441020 (2025). doi:10.26599/FRICT.2025.9441020
  4. A. Faiyad*, D. Miliate*, S. Leventini, J. R. Lince, A. Martini. Temperature-Dependent Friction, Wear, and Life of MoS₂ Dry Film Lubricants for Space Mechanisms: A Comprehensive Review. Tribology Letters 73(4), 114 (2025). doi:10.1007/s11249-025-02052-6
  5. S. Fardin, M. J. Moresalein, M. Motalab, A. Faiyad, R. Paul. Effects of Ultra-High Cooling Rates on the Tensile and Cyclic Stress–Strain Behavior of Nanoscale Solder Materials. Journal of Electronic Materials (2025). doi:10.1007/s11664-025-12048-6
  6. M. N. Azad, S. Zafar, A. Faiyad, H. S. Sim, S. L. Hong. Atomistic Study of Selenium Doping Effects on the Mechanical Properties of Zinc-Blende and Wurtzite CdTe Nanowires. Computational Materials Science 246, 113410 (2025). doi:10.1016/j.commatsci.2024.113410
  7. S. R. Romero Garcia, A. Faiyad, A. Martini. Modeling Sputtering Deposition of MoS₂: Effect of Ni Doping on Nanostructure and Tribological Properties. Computational Materials Science 244, 113229 (2024). doi:10.1016/j.commatsci.2024.113229
  8. T. Islam, M. S. A. Aziz, M. Motalab, A. Faiyad. Atomistic Study on the Cooling Rate Induced Mechanical Properties Variations in Additively Manufactured Inconel-718. ASME IMECE 2023 Paper IMECE2023-114456 (2023). doi:10.1115/IMECE2023-114456
  9. S. M. A. A. Alvi, A. Faiyad, M. A. M. Munshi, M. Motalab, M. M. Islam, S. Saha. Cyclic and Tensile Deformations of Gold–Silver Core–Shell Systems Using Newly Parameterized MEAM Potential. Mechanics of Materials 169, 104304 (2022). doi:10.1016/j.mechmat.2022.104304
  10. A. Faiyad, M. A. M. Munshi, M. M. Islam, S. Saha. Deformation Mechanisms of Inconel-718 at the Nanoscale by Molecular Dynamics. Physical Chemistry Chemical Physics 23(17), 10650–10661 (2021). doi:10.1039/D0CP06614A

Under review and in preparation

  1. A. Faiyad, F. H. Bhuiyan, J. Guo, C. J. Benmore, Á. Vázquez-Mayagoitia. Elucidating Bulk Structure, Transport Properties, and Chain Formation in Molten LiCl–FeCl₂: A Temperature and Composition Analysis. Under review.
  2. A. Faiyad, et al.. Fine-tuning a Foundation Interatomic Potential to Investigate Nitrogen-Dependent Structural Evolution in MoS₂. In preparation.
  3. A. Faiyad, et al.. Uncertainty-Biased Active Learning of MACE Interatomic Potentials for Complex Interfaces. In preparation.
  4. A. Faiyad, et al.. Thermodynamic Properties and Phase Diagram of Molten LiCl–KCl from ML Interatomic Potentials and Kirkwood–Buff Theory. In preparation.

Skills

Machine-learning potentials: MACE, UMA (fairchem), eSEN, DeepMD-kit, LoRA fine-tuning, Multi-head replay, Active learning, Uncertainty estimation

Simulation: LAMMPS, ASE, VASP, Quantum ESPRESSO, ReaxFF, EAM / MEAM, Metadynamics, Free-energy profiles

Data & code: Python, PyTorch, NumPy, SciPy, pandas, scikit-learn, Matplotlib, MATLAB

HPC & workflow: ALCF Aurora, ALCF Polaris, Slurm, PBS, MPI, GPU scaling, High-throughput DFT, Agentic workflows

Analysis & visualization: OVITO, VMD, Kirkwood–Buff theory, RDF / structure factor, MSD / diffusion, Parity & error analysis

Presentations

Effects of flake size on MoS₂ dry film lubricants at low temperatureMay 2025
Oral · STLE Annual Meeting & Exhibition, Atlanta, GA
Low-temperature mechanisms of MoS₂June 2024
Oral + poster · Gordon Research Conference (Tribology), Bates College, ME

Leadership & professional development

Argonne Training Program on Extreme-Scale Computing (ATPESC)July 2026
Selective two-week program on programming and scaling scientific applications on leadership-class HPC systems.
Multiscale Mechanical Modeling and Research Network, BUET2021 – present
Vice president (Jun 2021 – May 2022), now mentor. Organized 12 public webinars on computational mechanics and mentored students learning MD, which led to several peer-reviewed papers.
Peer reviewer2024 – 2025
Reviewer certificates issued February 2024 and October 2025.